|
BioBrom
C-100G
DBNPA Registered Microbiocide
|
| |
Broad Spectrum Microbiocide:
Active Ingredients: 2,2-Dibromo-3-NitriloPropionamide (DPNPA)
98% min.assay
Highly effective against a wide array of common water borne
organisms. BioBrom C-100G will control these organisms and help
to control microbiological fouling . Using a Dispensing
System to introduce BioBrom C-100G allows for a point of use
application of microbiocide that is both cost conscious as well
as effectively providing sufficient BioBrom C-100G to control
microbial activity….All accomplished without the need to
handle the material. |
| |
Degradation/Stability
BioBrom C-100G degrades rapidly and naturally at increased pH
& temperature levels. BioBrom C-100G is the product of choice
for systems operating under strict environmental and discharge
regulations. The ultimate degradation products are carbon dioxide,
ammonia, & bromide ion. Increasing cooling water alkalinity
presents a problem for most water treatment biocides. However,
for BioBrom C-100G even at higher pH values, rapid & effective
microbial control is achieved before any significant degradation
occurs. Ideal for quick, instantaneous antimicrobial activity,
but rapid degradation of the microbiocide for minimal environmental
impact. |
| |
Dosages
BioBrom C-100G application rates for industrial recirculating
cooling water systems will depend upon the conditions of the
system prior to treatment initiation. Systems which are heavily
contaminated, should be cleaned prior to product use. Apply
BioBrom C-100G to the cleaned system or when growth is first
noticed according to the following schedule: Initial Dosage:
Apply 1 lb of BioBrom C-100G per each 100,000 gallons of water
in the sysem. This dosage may be as a continuous treatment applied
once, twice or three times weekly or as required to control
the growth of slime forming organisms. Subsequent Dose: When
microbial activity is evident, add 1 lb of BioBrom C-100G per
100,000 gallons of bleed water as a continuous treatment daily
or every 3 days or as required to maintain control. |
| |
Feeding
Feed product from a Product Dissolution Board or similar system/board. |
| |
Packaging/Storage/Handling
Packaged in 4 x 1 containers per case. Case weighs 20 lbs. Follow
MSDS. Properly stored product will remain effective 24 - 36
months. Store in cool, dry area. |
| |
| The above information
is based on data available to us and is believed to be correct.
As the conditions or methods of use are beyond our control,
we do not assume any responsibility and expressly disclaim any
liability for any use of this material and this information
is furnished upon the condition that the person receiving it
shall make his own determination for the suitability of the
material for his particular purpose. the information contained
herein is believed to be true and accurate but all statements
or suggestions are made without warranty, expressed or implied,
regarding the accuracy of this information, the hazards connected
with the use of the material, the results to be obtained from
the use thereof, or any such use will not infringe any patent.
Compliance with federal, state, and local laws and regulations
remain the responsibility of the user. |
| |
|
|
