| E-Z
Feeder
Make-up Line Adapter Kit
for Water Treatment Solid-Concentrates
|
| |
Description
This kit contains the necessary hardware to convert cooling
water make-up piping for utilization of the E-Z Feeder. Make-up
water flow is diverted (to the E-Z Feeder) by means of a valve
assembly that allows a slight back-pressure to occur in the
tubing going to the dissolving unit. This is accomplished by
throttling the flow of make-up water through the float fill-valve
by means of a manual valve and T-assembly. See illustration:. |
| |
Components
(1) Threaded float valve with float and threaded connector wire
(3 feet provided)
(1) T-assembly (included pvc-T w/throttling valve and bushing-compression
fitting)
(1) 3/8 inch tubing roll (10 feet provided) |
| |
| |
| The above information is based
on data available to us and is believed to be correct. As the
conditions or methods of use are beyond our control, we do not
assume any responsibility and expressly disclaim any liability
for any use of this material and this information is furnished
upon the condition that the person receiving it shall make his
own determination for the suitability of the material for his
particular purpose. the information contained herein is believed
to be true and accurate but all statements or suggestions are
made without warranty, expressed or implied, regarding the accuracy
of this information, the hazards connected with the use of the
material, the results to be obtained from the use thereof, or
any such use will not infringe any patent. Compliance with federal,
state, and local laws and regulations remain the responsibility
of the user. |
|
|
