|
CPEN-C
Cooling Water Treatment
Solid-Concentrate
|
| Download
in MS Word Format |
Description
Solid-Concentrate CPEN-C is a cooling system dispersant and
penetrant which assists in the prevention and removal of organic
materials & foulants. This product was designed to supplement
cooling system inhibitor/dispersants & biocides to maintain
clean surfaces in heat transfer equipment and cooling towers.
CPEN-C penetrates the matrix of organic deposits which then
sloughs off and disperses. It also functions as a cleaner for
heavily fouled systems. Use should be in conjuction with biocides
to assist in maintaining a clean system |
| |
Application/Feedrate
CPEN-C should be fed at a rate of 20-100 ppm to maintain already
clean surfaces, 1-3 times per week. For systems that have a
greater tendency to foul, feed at a rate of 50-200 ppm, 2-3
times per week. To clean heavily fouled systems, feed at a rate
of 100-300 ppm daily, until clean. Always feed a biocide to
kill bacteria & algae in the system. Care should be taken,
when cleaning, to prevent clogging of screens and strainers
in heavily fouled systems when applying this product. NOTE:
This product will cause foaming when fed at high levels. |
| |
Testing & Control
ATP or colony count |
| |
Feeding
Feed product from a Product Dissolution Board or similar system/board |
| |
Packaging/Storage/Handling
Packaged in 4 x 1 gallon containers per case. Case weighs 36
lbs. Follow MSDS Properly stored product will remain effective
24 - 36 months. Store in cool, dry area. |
| |
| The above information is based
on data available to us and is believed to be correct. As the
conditions or methods of use are beyond our control, we do not
assume any responsibility and expressly disclaim any liability
for any use of this material and this information is furnished
upon the condition that the person receiving it shall make his
own determination for the suitability of the material for his
particular purpose. the information contained herein is believed
to be true and accurate but all statements or suggestions are
made without warranty, expressed or implied, regarding the accuracy
of this information, the hazards connected with the use of the
material, the results to be obtained from the use thereof, or
any such use will not infringe any patent. Compliance with federal,
state, and local laws and regulations remain the responsibility
of the user. |
