|
CPEN-C-STX
Cooling Water Treatment
Solid-Concentrate
|
| Download
in MS Word Format |
Description
Packaged in a stick form, designed to eliminate messy liquid
additions to water systems. Solid-Concentrate CPEN-C is a cooling
system dispersant and penetrant, which assists in the prevention
and removal of organic materials & foulants. This product
was designed to supplement cooling system inhibitor/dispersants
& biocides to maintain clean surfaces in heat transfer equipment
and cooling systems. CPEN-C penetrates the matrix of organic
deposits which then sloughs off and disperses. It also functions
as a general corrosion inhibitor & cleaner for heavily fouled
systems. Use should be in conjunction with biocides to assist
in maintaining a clean system. |
| |
Application/Feedrate
CPEN-C should be fed at a rate of 60-120 ppm( 1 stick per 1,000
gallons system volume ) to maintain already clean surfaces,
1-3 times per week. For systems that have a greater tendency
to foul, feed at a rate of 100-200 ppm( 2 sticks per 1,000 gallons
of system volume ), 2-3 times per week. To clean heavily fouled
systems, feed at a rate of 100-200 ppm( 2 sticks per 1,000 gallons
of system volume ) daily, until clean. Always feed a biocide
to kill bacteria & algae in the system. Care should be taken,
when cleaning, to prevent clogging of screens and strainers
in heavily fouled systems when applying this product. NOTE:
This product may cause foaming when fed at high levels. |
| |
Testing & Control
ATP or colony count |
| |
Feeding
Remove stick from corrugated packaging, and introduce into shot
feeder or open tank. Dissolving rates will vary depending upon
water composition, temperature, and flow rate. |
| |
Packaging/Storage/Handling
Packaged in 40 x 0.6lb sticks ( enclosed in individual water
soluble bags, packaged in corrugated packs ) per case. Case
weighs 24 lbs. The diameter of each stick is approximately 2
inches, fitting into most screw top capped shot feeders. Follow
MSDS. Properly stored product will remain effective 24 - 36
months. Store in cool, dry area. |
| |
| The above information is based
on data available to us and is believed to be correct. As the
conditions or methods of use are beyond our control, we do not
assume any responsibility and expressly disclaim any liability
for any use of this material and this information is furnished
upon the condition that the person receiving it shall make his
own determination for the suitability of the material for his
particular purpose. the information contained herein is believed
to be true and accurate but all statements or suggestions are
made without warranty, expressed or implied, regarding the accuracy
of this information, the hazards connected with the use of the
material, the results to be obtained from the use thereof, or
any such use will not infringe any patent. Compliance with federal,
state, and local laws and regulations remain the responsibility
of the user. |
|
|
