Description
Solid form, all-in-one boiler water treatment(no amine) for
SOFTENED make-up water applications
Function
BA1-SN-C is a proprietary boiler water treatment containing
corrosion inhibitors (extra sulfite for situations where there
is no DA or heater), scale control agents & alkalinity builders.
All components conform to FDA Title 21, Section 173 Boiler Water
Additives.
Application/Feedrate
Fed at 40 ppm, 1 lb of product treats approximately 25,000 lbs
of boiler blowdown. 1 case (48 lbs) is equivalent to 30 gallons
of a conventional liquid product (approximately 300 lbs). Liquid
equivalent comparative values will vary, dependent upon concentration.
Testing & Control
Sulfite
20 - 30 ppm in boiler water
p-Alkalinity
250 - 600 ppm in boiler water
Conductivity
recommended manufacturer guidelines
Feeding
Feed product from a Product Dissolution Board or similar system/board.
Packaging/Storage/Handling
Packaged in 4 x 1 gallon containers per case. Case weighs 48
lbs. Follow MSDS. Properly stored product will remain effective
24 - 36 months. Store in cool, dry area.
The above information is based
on data available to us and is believed to be correct. As the
conditions or methods of use are beyond our control, we do not
assume any responsibility and expressly disclaim any liability
for any use of this material and this information is furnished
upon the condition that the person receiving it shall make his
own determination for the suitability of the material for his
particular purpose. the information contained herein is believed
to be true and accurate but all statements or suggestions are
made without warranty, expressed or implied, regarding the accuracy
of this information, the hazards connected with the use of the
material, the results to be obtained from the use thereof, or
any such use will not infringe any patent. Compliance with federal,
state, and local laws and regulations remain the responsibility
of the user.
United
Supply Service, Inc.
Questions or comments? Email Webmaster
